How should I finish my Outdoor Vinyl Banner?

We offer a wide range of finishing methods for your Outdoor Vinyl Banner including Ropes & Eyelets, Hemmed Edges & Eyelets and Rod Pockets.

Banners up to 2100mm in height which include eyelets will have the new clear eyelets installed. These clear eyelets are a huge improvement over the old metal eyelets. They are just as strong as the old metal eyelets but allow you to see through the eyelet to your graphic - whereas the old metal eyelets would block the graphic and be a very noticeable obstruction.

Ropes & Eyelets: Finishing your banner with Ropes & Eyelets is perfect for when you need to hang your banner up between poles or to a tree. We hem quality 6mm rope into the banner so the edge of the banner is re-enforced, we then leave 1m of rope extending out of each corner of the banner. We then install clear eyelets into the corners of the banner and along the edges at a maximum distance of 1m apart.

Our eyelets have a 25mm external diameter and a 12mm internal diameter.

Hemmed Edges & Eyelets: If you don’t require rope, we can simply finish your banner with Hemmed Edges & Eyelets. This is the most popular option for people attaching banners to fences as you simply use cable ties (zip ties) through the eyelets. This is the same as the above option, the only difference is we simply don’t put add rope while hemming.

Rod Pockets: Rod Pockets are perfect as a hanging advertisement for your business. We produce 75mm Lay flat rod pockets that fit poles up to 40mm in diameter. The rod pockets can be put on the top and bottom of the banner, or on the left and right sides of the banner. If the rod pockets are put on the left and right sides it is important to note that we do not close off the top of the rod pockets. If you are using the banner with vertical poles (for a march) you will need to arrange for the top of the pockets to be closed off. If the rod pockets are put on the top and bottom, please note that this changes the maximum height that we can achieve to 2050mm H.

Velcro: We previously offered velcro finishing for vinyl banners but no longer offer this finishing method. If you require a banner that is to be attached to a surface with velcro, we recommend that you use a Fabric Banner which is a much lighter material. This product will look much better for this type of application.

Unfortunately, we cannot offer a combination of the above finishing methods as we automate many of our processes in order to increase efficiency, and get your products completed as quickly as possible!

If you are still unsure of the best finishing method for your application, please contact our Customer Happiness Team on 1300 972 077.

Click here to get an instant price on your outdoor vinyl banner.